Open 24/7 · Mold help for homes and propertiesServing Greater Minneapolis · (844) 352-3560
Call 24/7(844) 352-3560
Wall mold calls answered 24/7

Wall and Drywall Mold Removal in Bloomington, MN

Damaged drywall is removed and wall cavities are cleaned and dried in your Bloomington property. Call 24/7 to arrange your assessment and cleanup.

Call (844) 352-3560 Talk to a cleanup specialist nowAnswered 24 hours a day. No forms.
  • Wall moisture checked first
  • Contained removal and HEPA filtration
  • Cavities dried before repair
Black mold growing in vertical streaks on a white plaster wall
Cleanup before new drywallYour wall cavity is checked before it is closed.
24/7 callsDay, night, weekends and holidays
Moisture source firstFind and fix the leak or humidity
Contained work areaPlastic sheeting and HEPA filtration
Wall cavity to final checksContained removal and drying
Your cleanup service

Wall and Drywall Mold Removal Services in Bloomington

Cleanup addresses your wall cavity along with wallpaper, drywall and baseboards. Sound studs stay for cleaning and drying; damaged drywall and wall insulation come out.

Cleaning or removal depends on the state of your drywall, which is porous when paper-faced. Plans for reaching behind cabinets and tile are set before work starts.

Mold removal from walls starts with tracing a plumbing leak, window leak or condensation on an exterior wall. Your written scope of work separates cleanup from leak repair, drywall replacement and painting after remediation.

  • Wall surface and cavity assessment
  • Controlled removal of damaged sheetrock
  • Affected wallpaper and insulation removal
  • Sound framing cleaned and dried
  • Moisture checks before wall repair
White wall with bubbling and peeling paint above a stone baseboard
Call (844) 352-3560No forms. Just call.
Signs of a problem

Recognizing the Need for Wall Mold Cleanup in Hennepin County

Soft board, returning mold or moisture in finishes signal a need to assess your wall.

Musty Smell Near a Wall

An ongoing smell around your cabinets may accompany hidden damp materials.

Mold on Walls Keeps Returning

Spots reappear near windows, baseboards or plumbing fixtures after cleaning or painting.

Mold Behind Wallpaper

Peeling back paper exposes patches underneath on either the wall or the backing.

Soft Drywall and Peeling Paint

Bubbling paint, swelling or water stains remain after a leak.

Dampness Along Several Walls

Recurring marks in different rooms can indicate moisture extending past one visible area.

Call (844) 352-3560Talk it through with a cleanup specialist
Step by step

Understanding the Steps in Wall and Drywall Mold Removal

Your walls are assessed first. Contained removal follows, then surfaces are cleaned and dried before verification.

  1. Assess the Wall and Cavity

    Your visible mold and finish damage undergo assessment. A moisture meter maps dampness; a thermal imaging camera flags temperature differences but cannot identify mold.

  2. Find Wall Moisture and Define the Work

    Investigation covers hidden moisture along with condensation and leaks. Removal boundaries and separate moisture repairs are explained before work starts.

  3. Contain the Wall Work Area

    For the containment barrier, poly sheeting is used. Particle spread is limited with a HEPA air scrubber, protective equipment and negative air pressure.

  4. Remove Damaged Drywall

    Damaged board, wallpaper and insulation are removed within containment. Assessment covers the newly exposed cavities, while debris exits bagged along a safeguarded route.

  5. Clean Exposed Wall Surfaces

    HEPA vacuum cleaning and surface cleaning are used on suitable non-porous surfaces and sound framing. Using antimicrobial treatment cannot substitute for physical cleanup.

  6. Dry the Wall Cavity

    Once cleaning ends, air movers help with drying together with a dehumidifier. Repairs address condensation or leaks as moisture readings show how drying progresses.

  7. Complete the Post-Remediation Check

    Checks on moisture correction, cleanup and drying precede closing your wall. Your scope determines whether an independent assessor conducts clearance testing.

  8. Remove Containment After Verification

    Containment comes down after agreed post-remediation verification. The separate scope for rebuilding sets out insulation, drywall and finish repairs.

Call (844) 352-3560Answered 24/7, including holidays
Why property owners call

Why Choose Minneapolis Mold Removal Services for Drywall Mold Removal and Wall Cleanup

Calls Answered 24/7

One number starts your wall cleanup across Greater Minneapolis, including nights and weekends.

Contained Work With HEPA Filtration

Your wall work area uses containment together with HEPA filtration to reduce particle spread.

Clear Wall Removal Scope

Your scope defines wall sections, cavity access and separate rebuilding before removal begins.

Cleanup Through Final Checks

After damaged board comes out, framing receives cleaning and drying; verification happens before containment removal.

Wall Moisture First

Your leaks and condensation are traced during assessment ahead of damaged board replacement.

Call (844) 352-3560Ask about cost and timing by phone
First steps

Before Wall Cleanup Begins in Hennepin County

Keep your damaged walls intact. Call to have them assessed.

  1. Address active water. Arrange leak repair when safe; keep away from wet wiring and outlets.
  2. Leave the wall intact. Do not scrape growth, sand drywall or pull away wallpaper before assessment.
  3. Limit access. Prevent pets and children from approaching damaged materials or entering the work area.
  4. Avoid spreading particles. Avoid directing fan airflow onto moldy walls, and follow EPA advice to stop using HVAC equipment with suspected contamination.
  5. Keep damage uncovered. Do not paint over mold or cover damp board with new finishes.
Price ranges

Your Wall and Drywall Mold Removal Cost in Bloomington

Cavity damage, access and the area in square feet affect your price. These ranges are national, with removal costs distinct from drywall repairs. Overlapping figures for removal should not be combined.

Wall mold removal

$1,000 to $12,000 per jobSource: Fixr, Mold Remediation Cost (checked 2026-10-23)

Drywall mold removal can total $20,000 or more for full removal

$1,000 to $20,000 per jobSource: This Old House, Mold Remediation Cost (cost data credited to Angi) (checked 2026-10-23)

After removal, drywall replacement or repair work

$1,000 to $2,900 per jobSource: Servpro, Mold Remediation Cost (checked 2026-10-23)

Understanding Changes in Your Wall Cleanup Cost

  • Insulation and framing condition
  • Access behind cabinets
  • Separate testing and moisture repairs
  • Affected wall square footage
  • Containment and air filtration

The Price of Your Wall Cleanup

These published national ranges are planning figures. Your on-site assessment defines the work and price before cleanup starts, including any separate source repairs or rebuilding.

Call (844) 352-3560 about cost
Service area

Wall and Drywall Mold Removal Service Area Across Greater Minneapolis

Call (844) 352-3560 to arrange cleanup in Bloomington or nearby communities. One number covers the metro.

Wall and Drywall Mold Removal in Locations Near Bloomington

ZIP codes

Call (844) 352-3560Private help, day or night
Questions

What People Ask About Wall and Drywall Mold Removal in Bloomington

How long will your wall cleanup in Bloomington last?

Your schedule is set after the affected board, cavity and access route are assessed. Removing a small section involves different work from opening walls behind cabinets. Moisture readings guide drying, regardless of how surfaces look. Finishing drywall, repairing leaks and completing verification also influence when normal use of your room can resume.

In Hennepin County, what can drywall cleanup cost?

Your cost reflects damage within the cavity, the affected square footage and access behind finished surfaces. Published national ranges appear in the cost cards above, alongside sources and units. Drywall repairs fall into a category separate from removal. Your on-site assessment defines the work and price before cleanup begins.

Will the moisture issue be corrected as part of wall cleanup?

The moisture source is found in the assessment, with needed corrections outlined together with removal and drying. Plumbing repairs, window repairs and ventilation changes are included only when listed in your scope. Your cleaned cavity must not enclose an ongoing water issue, so separate repair needs are identified before starting.

Is testing necessary ahead of wall removal or following removal?

Visible mold often does not need air sampling under EPA guidance. Inspection and moisture checks establish the affected materials and removal area. Cleaning and drying are checked before containment comes down. An assessor independent of the removal work conducts clearance testing when specified. Federal rules set no limit on indoor mold levels.

Is staying home possible while your walls are cleaned?

Staying home may be possible if containment and the debris route remain separated from occupied rooms. Your layout, shared ventilation, affected bedrooms and household needs determine access restrictions. Some jobs require temporary arrangements elsewhere. Before opening walls, removing materials or cleaning, these conditions undergo assessment.

Will the wall need to be taken out completely?

The damage uncovered by assessment sets the removal area, without automatically requiring replacement of your entire wall. Insulation beyond saving and mold-affected paper-faced board may have to come out. Studs that remain sound often allow cleaning and drying. Before more removal proceeds, the scope changes if the opened cavity exposes additional damage.

Will mold in walls return after cleanup?

An unresolved water problem can let mold return. Cleanup begins after your assessment investigates leaks, moisture in cavity materials and condensation. Before installing replacement board, sound framing is cleaned and then dried. Ongoing humidity control and moisture repairs help keep the original conditions for growth from returning.

Insurance

Your Wall Mold Cleanup and Insurance in Minnesota

Homeowners insurance coverage depends on the moisture cause, exclusions, mold limits and deductible. Cleanup and rebuilding may receive different coverage decisions.

Health and safety

Wall Mold Safety Considerations Throughout Greater Minneapolis

Containment limits the spread of mold spores and wall dust.

Sensitive Occupants

Allergy symptoms and asthma symptoms can be triggered in some people by mold. People with weak immune systems, asthma or lung disease are more at risk.

Wall Mold Color

CDC cautions that judging mold risk by color is unreliable, even for black mold on drywall.

Contaminated Water

EPA advises professional help for mold involving sewage or contaminated water.

Concealed Wall Damage

New board should enclose the cavity only after deteriorated framing has been assessed for repair.

Cleanup scope: For areas below about 10 square feet, EPA says homeowner cleanup is often possible. Seek a professional for contaminated water, HVAC systems or larger affected areas.

Materials

Cleaning or Removing Your Wall Materials in Hennepin County

Cleaning suits sound materials, but damaged porous items may have to be removed.

Drywall and insulation

  • Removal includes bagging moldy board, ruined insulation and damaged wallpaper.

Wall studs and plaster

  • You can have sound framing cleaned and dried, with separate assessments for plaster and the backing.

Trim and hard surfaces

  • You may need to replace swollen trim, but reachable metal, tile and glass may be suitable for cleaning.
Timeline

Wall Cleanup and Repair Timing in Hennepin County

Drying, access and repairs following remediation determine your schedule.

  • Wall access: Access to damaged materials depends on cabinets, adjoining rooms and tile.
  • Cavity drying: Readiness for new board on cleaned framing is determined by moisture readings.
  • Finishing: Cleanup and the agreed verification precede installing drywall, completing joint finishes and applying paint.
Odor and air

Moisture Control and Wall Odor in Bloomington

Painting or using fragrance cannot fix your damp wall materials. Musty smells are assessed by checking moisture.

EPA recommends indoor relative humidity below 60 percent, ideally 30 to 50 percent. Leak correction and appropriate ventilation help keep repaired walls dry.

Rules in plain English

What Wall Cleanup Requires in Minnesota

State Work Requirements

The Minnesota Department of Health says neither the state of Minnesota nor any federal agency licenses or certifies mold investigators or remediators. If you are hiring someone, ask about their training and experience, and check your local contractor rules.

EPA Guidelines for Drying

Prevent mold growth by drying water-damaged items and areas within 24 to 48 hours.

Wall Repair Permits

Your permit requirements vary with the plumbing, rebuilding or structural work involved.

State Mold Information

The Minnesota Department of Health, Environmental Health Division, Indoor Air Unit offers phone and email advice on mold at 651-201-4601. It does not offer inspection or testing services.

Black mold growing in vertical streaks on a white plaster wall

Start Your Wall and Drywall Mold Removal in Bloomington

Call 24/7 to arrange your assessment. Your cleanup starts with the affected surfaces, moisture source and access to your home.

Call (844) 352-3560
Call (844) 352-3560 · 24/7